Windows Server 2012

There are three main techniques by which Essentials can be physically installed onto the server:  Method 1 – Essentials has been supplied on a DVD. Go into the BIOS of the server and set it to boot from CD/DVD (accessing the BIOS varies according to the server brand, but is typically the F2 key on Dell and the F10 key on HP). Insert the DVD, connect an Ethernet cable to the server and restart it.  Method 2 – The server manufacturer has supplied a special start-up or management disk. This typically provides driver and RAID support for the server and may do some other configuration work. The usual process is to set the server to boot from CD/DVD as described above. Insert the disk, plug in an Ethernet cable and restart the server. The management software will run – this may take several minutes – but eventually you will be prompted to eject the disk and insert the Essentials DVD. The server may then restart.  Method 3 – Essentials has been purchased pre-loaded on the server...